
L1 Controller Commands
007-3938-003 63
l1
Use the l1 command to engage the L1 controller command processor. Press Ctrl+D to
disengage the command processor. Example 3-34 shows sample output.
Example 3-34 l1 Command Output
001c003-L1>l1
L1 command processor engaged, <CTRL-D> to exit.
Used on all bricks.
l1d/jointfilesconvert/406456/bg
The following l1d/jointfilesconvert/406456/bg command set displays and sets the state of communication
debugging features.
• l1d/jointfilesconvert/406456/bg
• l1d/jointfilesconvert/406456/bg junkbus <on|off>
• l1d/jointfilesconvert/406456/bg irtr <on|off>
• l1d/jointfilesconvert/406456/bg env <exp> (1=pwr, 2=fan, 4=tmp, 8=setup)
• l1d/jointfilesconvert/406456/bg env off
• l1d/jointfilesconvert/406456/bg port <on|off>
• l1d/jointfilesconvert/406456/bg i2c <on|off>
• l1d/jointfilesconvert/406456/bg margin <on|off>
• l1d/jointfilesconvert/406456/bg pppdump <on|off>
• l1d/jointfilesconvert/406456/bg promreq <on|off>
• l1d/jointfilesconvert/406456/bg qsusp <exp> <exp>
Use l1d/jointfilesconvert/406456/bg to display the state of the communication debugging features. Example 3-35
shows sample output.
Comentários a estes Manuais