SGI Ethernet Card Guia do Utilizador descarregar pdf (Página 32)

4: Performance Tuning

sizes were chosen to be compatible with those recommended by the card

manufacturer and required by SGI’s software. To set the network buffer sizes:

1. Add or change the following entries in the /etc/sysctl.conf ﬁle:

net.core.rmem_default = 524287

net.core.rmem_max = 524287

net.core.wmem_default = 524287

net.core.wmem_max = 524287

net.ipv4.tcp_rmem = 10000000 10000000 16777216

net.ipv4.tcp_wmem = 10000000 10000000 16777216

net.ipv4.tcp_mem = 10000000 10000000 16777216

net.core.netdev_max_backlog = 300000

net.core.optmem_max = 524287

net.ipv4.tcp_timestamps = 1

net.ipv4.tcp_sack = 1

net.ipv4.tcp_tw_recycle = 1

net.ipv4.tcp_tw_reuse = 1

2. Make the sizes take effect:

[root@linux root]# sysctl -p /etc/sysctl.conf

TCP Time Stamps

TCP time stamps are turned on by default to greatly reduce the chance of data

corruption at high throughput rates. Therefore, SGI strongly recommends their use.

14 007–4983–002

1 2 ... 27 28 29 30 31 32 33 34 35 36

Sem comentários

SGI Ethernet Card Guia do Utilizador Página 32